Home > Power cables, flame retardant > Power cables low voltage,flame retardant
Power cables low voltage,flame retardant
Uo/U - 0.6/1 kV VDE 0276 part 603
Application
These cables are designed for transfer and distribution of electrical power with nominal voltage U 0 / U 0 6/1 kV, frequency 50Hz and surroundings, which require non-proliferation of flames. NYYfr-0/J is used in power plants, industrial and switching installations, for street lighting, domestic power supply connections, in secondary distribution networks and other.
Note: Other core configuration and special constructions manufactured upon request. Cables with same construction may produced according to IEC 60502.
0.00 лв.
Uo/U - 0.6/1 kV VDE 0276 part 603
Application
These cables are designed for transfer and distribution of electrical power with nominal voltage U 0 / U 0 6/1 kV, frequency 50Hz and surroundings, which require non-proliferation of flames. NYCY-FR is used in power plants, industrial and switching installations, for street lighting, domestic power supply connections, in secondary distribution networks and other.
These cables are preferentially used for underground application as well as for interior installation in room and cableducts and for outdoor and applications, for indoor installations, where greater mechanical protection an protection against accidental contact is required if damaged.
Note: Other core configuration and special constructions manufactured upon request.
0.00 лв.
Uo/U - 600/1000 V IEC 60502-1
Application
Powet cable suitable for transmission of electricity up to 1000 V, used in house and industrial installations. Appropriate for internal installation even in damp surroundings and for outdoor applications-whether there in possibility for direct instalation.
0.00 лв.
Uo/U - 0.6/1 kV IEC 60502-1,Uo/U - 0.6/1 kV IEC 60502-1
Application
These cables are designed for transfer and distribution of electrical power with nominal voltage U 0 / U 0 6/1 kV, frequency 50Hz and surroundings, which require non-proliferation of flames. 2XYRYfr and A2XYRYfr is used in power plants, industrial and switching installations, for street lighting, domestic power supply connections, in secondary distribution networks and other.
These cables are preferentially used for underground application as well as for interior installation in room and cableducts and for outdoor and applications, for indoor installations, where greater mechanical protection an protection against accidental contact is required if damaged.
0.00 лв.
Uo/U - 0.6/1 kV IEC 60502-1Uo/U - 0.6/1 kV IEC 60502-1
Cu/Al conductors • XLPE insulation • PVC sheath • Armour Al wires • PVC sheath
Application
These cables are designed for transfer and distribution of electrical power with nominal voltage U 0 / U 0 6/1 kV, frequency 50Hz and surroundings, which require non-proliferation of flames. 2XYRaY-FR and A2XYRaY-FR is used in power plants, industrial and switching installations, for street lighting, domestic power supply connections, in secondary distribution networks and other.
These cables are preferentially used for underground application as well as for interior installation in room and cableducts and for outdoor and applications, for indoor installations, where greater mechanical protection an protection against accidental contact is required if damaged.
0.00 лв.
Uo/U - 0.6/1 kV NBN C 33-121 and comment No 1 and 2
Application
Three-core cables with insulation of polyvinylchloride (PVC) - armored type are designed for transfer and distribution of electrical power networks with voltage of 1000 V.
The sheath is flame retardant.
The cables are for fixed assembly in lines with unlimited difference levels, for underground, in cable ducts, conduits, shafts, trenches, pipes, shafts, over shelves and grills directly underground in ditch.
0.00 лв.
1